Juniper EX4300 Series

File System Usage
To display the le system storage details of a switch in the backup or line card role, click the image of
that switch.
For EX4650, EX4400, EX4100, and EX4100-F switches, the directory, space used, and the le type
details are displayed. By default, primary switch le system storage details are displayed. When you click
the image, line card switch le system storage details are displayed.
Chassis Viewer
Click the Rear View buon to see the back of the chassis image. Click the Front View buon to see the
front of the chassis image. In a Virtual Chassis conguraon, the Rear View buon is disabled if the
switch is not selected.
NOTE: For EX4650 switches, chassis viewer supports only the standalone view and does not
support Virtual Chassis conguraon.
Starng in Junos OS Release 22.3R1 which aligns with the J-Web Applicaon package release
22.3A1, J-Web supports EX4400 switches.
Starng in Junos OS Release 22.4R1 which aligns with the J-Web Applicaon package release
22.4A1, J-Web supports EX4100 and EX4100-F switches.
• Table 77 on page 270—Describes the chassis viewer for EX2200 switches.
• Table 78 on page 271—Describes the chassis viewer for EX2200-C switches.
• Table 79 on page 271—Describes the chassis viewer for EX3200, EX3300, and EX4200 switches.
• Table 80 on page 274—Describes the chassis viewer for EX4100 and EX4100-F switches.
• Table 81 on page 276—Describes the chassis viewer for EX4400 switches.
• Table 82 on page 279—Describes the chassis viewer for EX4500 switches.
• Table 83 on page 280—Describes the chassis viewer for EX4550 switches.
• Table 84 on page 282—Describes the chassis viewer for EX4650 switches.
• Table 85 on page 283—Describes the chassis viewer for EX6210 switches.
• Table 86 on page 285—Describes the chassis viewer for EX8208 switches.
269