Kaye ValProbe RT - Safety Information

Chapter 1: Kaye ValProbe® RT System
ValProbe RT User Manual 5
S.No
Logger Package
Qty
1
ValProbe RT Loggers
As per order
2
Logger batteries
As per order
S.No
Accessories
Qty
1
Kaye Validation Console with docking station and power adapter
(required)
As per order
2
Logger transport/storage tray
As per order
3
Kayetenna 2.5 / 5 meters (extendable autoclave antenna)
As per order
4
Insulating Canister
As per order
5
Logger AA Battery Extension Kit
As per order
Use ONLY Kaye #200-166 3.7 V lithium secondary (rechargeable) batteries
inside the Base Station. Insertion of a non-rechargeable battery may cause
over-heating and explosion.
Utilisez UNIQUEMENT les piles secondaires (rechargeables) au lithium 3,7 V
Kaye #200-166 à l'intérieur de la station de base. L'insertion d'une batterie
non rechargeable peut provoquer une surchauffe et une explosion.
1.4. Safety Information
Use this instrument as specified in this Manual.
• Protection provided by the equipment may be impaired if the equipment is used in a
manner not specified by Kaye.
• Do not use this equipment in environments other than those listed in the Manual.
CAUTION! ONLY Use Kaye #200-166 3.7 V lithium secondary (rechargeable) batteries.
Using any other batteries renders the stated performance void as Kaye
#200-166 3.7V batteries are the only brand tested and accepted.
ATTENTION ! Utilisez cet instrument comme indiqué dans le présent manuel. La
protection fournie par l'équipement peut être compromise si l'équipement
est utilisé d'une manière non spécifiée par Kaye.
Insertion of non-rechargeable battery may cause over-heating and
explosion.
L’insertion d’une batterie non rechargeable peut provoquer un sur-
chauffage et une explosion.