Chapter 2: Kaye ValProbe RT Hardware
ValProbe RT User Manual 23
2.4. Kaye ValProbe RT Base Station
Base Station Overview
The ValProbe RT Base Station acts as the central hub and communications link between the
wireless Loggers and the ValProbe RT Console /software. The Base Station is responsible for
establishing and maintaining wireless communications with the Loggers utilizing a 2.4GHz
Star network with a proprietary and encrypted (AES128) protocol compliant to IEEE 802.15.4
standards. The wireless range from the Base Station to any Logger is 450 ft. (~150 meters).
Figure 31: ValProbe RT Base Station
CAUTION! Use only the Kaye power supply (Kaye #201-3006) provided with your
ValProbe RT. The use of non-factory power supplies may damage the
equipment and will void your warranty.
ATTENTION !Utilisez uniquement l’alimentation Kaye (Kaye #201-3006) fournie avec
votre ValProbe RT. L’utilisation d’alimentation non-usine peut
endommager l’équipement et annuler votre garantie.
Base Station Power / Communications Connection
The Base Station also provides an Ethernet connection at the base of the unit for
communications from the Base Station directly to the Console / Docking Station (Static IP) or
by using an ethernet network connection via DHCP. (See Chapter 3 for details on connection
options and configuration.)
The base of the unit also includes the connection for the supplied Power Supply as well as a
Reset button for service emergencies (See Chapter 3).
Figure 32: Base Station Connections
To Next Page
Loading...