Appendix A. Specifications
ValProbe RT User Manual 149
A.2 Kaye ValProbe RT Base Station
A.2.1 Input Power and Adaptor Ratings
AC-DC adaptor input 100 to 240Vac 50/60Hz and output 12Vdc, 4A.
A.2.2 Installation Category
Pollution Degree 2, indoor use and maximum working altitude up to 2,000 meters.
A.2.3 Overvoltage Category and Electrical Safety Protection Class
Overvoltage category I and Electrical safety protection Class III.
A.2.4 Input DC Power On/Off Switch
Switch to turn on/off DC input power to Base Station.
A.2.5 Front Panel LED Indications and Buzzer
LED indications on front panel and internal buzzer for status monitoring and alarms.
A.2.6 Bath and IRTD Interface Ports
Bath port supports to interface all Kaye brand temperature baths and IRTD port to connect
IRTD-400 temperature reference standard to run calibrations.
A.2.7 USB Port
USB port to connect USB storage thumb drive device to copy last ten raw study files.
A.2.8 Ethernet Communication Port
Ethernet RJ45 port to connect to LAN network or directly to console docking station.
A.2.9 Reset Switch to Reload Default Factory Settings
Push button reset switch to reset the Base Station to default factory settings.
A.2.10 Wakeup Magnet
Wakeup magnet (underneath LED panel) to wakeup Logger from shelf mode.
A.2.11 Batteries
Two 3.7V AA Lithium-ion rechargeable batteries for 30-minute backup with three-hour
recharge time.
A.2.12 Unit Dimensions
190 mm (7.6”) x 130 mm (5.2”) x 55 mm (2.3”) (L x W x H).
A.2.13 Enclosure Material
Premium ABS plastic with FDA grade and conforming to safety UL 94-HB flammability
rating.
To Next Page
Loading...