Chapter 3: ValProbe RT System Connections
ValProbe RT User Manual 27
POWER LED:
• GREEN indicates that power input is operational.
• RED indicates an input power fail.
BATTERY CHARGE LED:
• GREEN indicates that battery has full capacity.
• GREEN blinking indicates the battery is charging.
• No indication that a battery is present or a battery issue.
• RED blinking indicates that battery is at low capacity or a battery issue.
STUDY STATUS LED:
• GREEN indicates that a study is in progress.
• GREEN blinking indicates that a data transfer is in progress to USB storage.
• RED blinking indicates a data transfer error to the USB storage.
• BLUE indicates that a firmware upgrade is in progress or the study stopped.
• BLUE blinking indicates that RF data retrieval is in progress.
COMMUNICATION LED:
• GREEN indicates that the console is connected with the Base Station.
Other Scenarios:
• All colors (RED, GREEN, and BLUE) blink once after power on,
• All four lights blink RED, indicates that a Logger joined with the Base Station.
To Next Page
Loading...