VOICE
◦ Off: moving the Pitch Wheel has no effect.
◦ Pitch: the Modulation Wheel controls the pitch.
◦ Pitch+LFO: the Modulation Wheel controls both the pitch and the LFO depth.
• PITCH RANGE: sets the maximum excursion in semitones for the Pitch Wheel. For
example, if the pitch range is set to +-6, the pitch is increased by 6 semitones when the Pitch
Wheel is moved all the way up and decreased by 6 semitones when the Pitch Wheel is
moved all the way down.
• AFTERTOUCH: defines the aftertouch (Channel Pressure MIDI messages) behaviour for
the layer:
◦ Off: applying pressure to the keyboard has no effect.
◦ LFO: the aftertouch controls the depth of the LFO that is used to modulate the pitch.
◦ Soft LFO: the aftertouch controls the depth of the LFO that is used to modulate the
pitch. It has a reduced values range.
◦ Bend: the aftertouch controls the pitch. Applying a pressure to the keyboard makes the
pitch higher.
NB: the aftertouch must be enabled in the CONTROL page of the MENU.
• SLIDE: if enabled, produces a pitch bend effect, when a key is pressed with a velocity above
a certain threshold (only “Voice” layers). You can choose between Off, Slide1, Slide2 and
Slide3. They differ for the amount of bending applied.
• THRESHOLD: sets the threshold above which the slide effect is applied.
KETRON - LOUNGE 79
To Next Page
Loading...