296 N9030B PXA Signal Analyzer Service Guide
CPU/Disk Drive Troubleshooting
Disk Drive Recovery Process
Table 9-2 Using the instrument recovery system
Step Notes
1. Make sure the instrument is turned off.
2. Turn on the instrument.
— Press the down arrow key to move the
highlight to Keysight Recovery
System, then press Enter.
After the Keysight Technologies screen is
displayed,
This screen is displayed for five seconds.
3. When the Keysight Recovery System
has booted, follow the on-screen
instructions to recover the image of the
C: drive.
— Press
2, then press Enter to select the
recovery.
4. A warning message appears.
— Press
Enter to start the recovery, which
may take up to 25 minutes to complete.
After exiting the Keysight Recovery System, the instrument reboots.
Update the X-Series software to the latest version by downloading it from the following URL:
www.keysight.com/find/xseries_software
To Next Page
Loading...
Need help?
General
