94 N9030B PXA Signal Analyzer Service Guide
Instrument Messages
Event Messages
Event Messages
Event messages read out in the MSG area in the bottom left of the display.
Event messages and message numbers are defined by the SCPI standard.
In the X-Series, sub-messages are often attached to add additional
information, to help the user better understand the event being reported. For
example, error –221 is defined as “Settings Conflict”, but in the X-Series you
will often see a longer message with error –221, such as “Settings Conflict;
Function not available in Zero Span”. This helps you understand exactly why
you are getting a Settings Conflict error.
To Next Page
Loading...
Need help?
General
