N9030B PXA Signal Analyzer Service Guide 431
Assembly Replacement Procedures
What You Will Find in This Chapter
Before Starting
Before starting to disassemble the instrument:
• Check that you are familiar with the safety symbols marked on the
instrument. And, read the general safety considerations and the safety note
definitions given in the front of this guide.
• The instrument contains static sensitive components. Read the section
entitled “ESD Information” on page 25.
Safety
The opening of covers or removal of parts is likely to expose dangerous voltages. Disconnect the
product from all voltage sources while it is being opened.
The instrument contains potentially hazardous voltages. Refer to the safety symbols on the
instrument and the general safety considerations at the beginning of this service guide before
operating the unit with the cover removed. Failure to heed the safety precautions can result in
severe or fatal injury.
To Next Page
Loading...
Need help?
General
