380 N9030B PXA Signal Analyzer Service Guide
Replaceable Parts
Replaceable Parts
Replaceable Parts
Some of the assemblies listed in the following table are related to options that
are available with the PXA Signal Analyzer. These options are described below.
Table 15-1 All Replaceable Parts
Reference
Designator
Description Part Number
A1A1
Front Frame Assembly Replacement Kit
a
Includes:
N9020-60299
Front Frame (with the following pre installed) N9020-20352
USB Ground Spring
N9020-20258
Braided gasket 8160-0660
EMI Gasket long 8160-1997
EMI Gasket short (2 included) 8160-1998
Front Frame Side Trim Strips (plastic, 2 ea) N9020-40018
Side trim, phantom gray, (adhesive, 2 included) 5041-7905
Side trim, adhesive backed (2 included) 5041-7905
Top trim N9020-40005
Cover Plate N9020-00002
Screw, flat head M3 x 0.5 6 mm long (2 included) 0515-1946
Display Boot N9020-40002
Hole Plug, 0.25 inch (2 included) 6960-0076
The following are in the kit but not installed:
Keyboard overlay (with EXM) N9020-80127
Keyboard overlay (without EXM)
b
N9020-80168
Keyboard Overlay (CXA)
a
N9000-80045
Overlay, solid left N9020-80164
Overlay, for CXA 75 ohm input
a
N9000-80046
Overlay, left for CXA TG Output
a
N9000-80104
Overlay, BBIQ Bottom N9020-80166
Overlay, BBIQ top N9020-80163
A1A2 Front Panel Control Board
N9020-63294
To Next Page
Loading...
Need help?
General
