410 N9030B PXA Signal Analyzer Service Guide
Replaceable Parts
Hardware
Figure 15-12 Front End Parts (Options 544, 550, EP0, B5X)
Table 15-14 Front End Parts (Options 544, 550, EP0, B5X)
Item Description Keysight Part Number
A13MP1 Bracket, Coax Switch cover (Option B5X) N9030-00003
FL3 5.7 GHz bandpass filter on A13 (Option B5X) 9135-6217
SW5 Switch, Coax, on Option B5X Front End Assembly N1810-60102
SW6 Switch, Coax, on Option B5X Front End Assembly N1810-60102
W8 Cable, semi-rigid, Front End assy J2 to Low Band Switch J2 (Options
544, 550)
N9020-20131
W12 Cable, wire harness, 4 switch control, FE controller J801 (Option B5X) N9030-60035
W16 Cable, IF Out from Front End Assy J7 to Front End Control J902 8121-1862
W18 Cable, semi-rigid, 2nd LO In, Reference Assy J702 to Front End Assy J1 N9020-20077
W19 Cable, semi-rigid, AUX LO Out from Front End Assy J3 to Switched
Filter Assy J6
N9020-20022
W30 Cable, coax, Ext IF Out, A13J13 to Front End Control J903 (Option 544,
550) (Option EXM)
8121-2025
W33 Cable, coax, 50 MHz Align, Front End Assy J6 to Reference Assy J705 8121-1940
To Next Page
Loading...
Need help?
General
