24 N9030B PXA Signal Analyzer Service Guide
Overview
Lithium Battery Disposal
Lithium Battery Disposal
The X-Series Signal Analyzer uses an internal 3.0 VDC battery that contains
Lithium/Manganese Dioxide (Li/MnO2). The battery is located on the A4 CPU
assembly to power the instrument clock and back up data in SRAM. When the
battery is exhausted and ready for disposal, dispose of it according to your
country’s requirements. The Keysight part number is 1819-1069. The
manufacturer’s part number is CR2032. You can return the battery to your
nearest Keysight Technologies Sales and Service office for disposal, if required.
Refer to “Contacting Keysight Technologies” on page 45 for a list of Keysight
Technologies Sales and Service offices.
Always use the three-prong ac power cord supplied with this product.
Failure to ensure adequate earth grounding by not using this cord may
cause product damage.
This instrument has an autoranging line voltage input; be sure the supply
voltage is within the specified range.
To Next Page
Loading...
Need help?
General
