83
Keysight Technologies
N9030B PXA Signal Analyzer
Service Guide
3 Instrument Messages
Introduction
The Error and Status messaging system of the Keysight Signal Analyzer reports
events and conditions in a consistent fashion, as well as logging and reporting
event history.
Event vs. Condition Messages
An Event is simply a message indicating that something has happened. Events
are sub-divided according to their severity, into Error, Warning or Advisory
categories. The sub-divisions are described in more detail in the section “Event
and Condition Categories”.
Event messages appear in the Message Line at the bottom left of the analyzer’s
display window.
A Condition is a state of the Analyzer, which is characterized by a Detection
event and a Clearing event. Conditions may be Errors or Warnings.
Condition messages appear in the Status Panel at the bottom right of the
analyzer’s display screen.
To Next Page
Loading...
Need help?
General
