N9030B PXA Signal Analyzer Service Guide 323
Hardware Options
What You Will Find in This Chapter
P03 Preamp, 100 kHz to 3.6 GHz License Only Chapter 4, “RF Section
Troubleshooting
(RF/Microwave Analyzers)”
P08 Preamp, 100 kHz to 8.4 GHz License Only Chapter 4, “RF Section
Troubleshooting
(RF/Microwave Analyzers)”
P13 Preamp, 100 kHz to 13.6 GHz License Only Chapter 4, “RF Section
Troubleshooting
(RF/Microwave Analyzers)”
P26 Preamp, 100 kHz to 26.5 GHz License Only Chapter 4, “RF Section
Troubleshooting
(RF/Microwave Analyzers)”
P43 Preamp, 100 kHz to 43 GHz License Only Chapter 5, “RF Section
Troubleshooting
(Millimeter-Wave Analyzers)”
P44 Preamp, 100 kHz to 44 GHz License Only Chapter 5, “RF Section
Troubleshooting
(Millimeter-Wave Analyzers)”
P50 Preamp, 100 kHz to 50 GHz License Only Chapter 5, “RF Section
Troubleshooting
(Millimeter-Wave Analyzers)”
RTL Data Link that enables rear panel
Digital Bus connector.
License Only
RTS Streaming License and Hardware This chapter
YAV Y-Axis Output
(at rear panel Analog Out
connector)
License Only Chapter 7, “Analog/Digital IF
Troubleshooting”
See Chapter 13, “Block Diagrams” for information on how these hardware options are
installed in the signal path.
Table 12-1 Hard ware Options
Option Description Additional Hardware or
License Only
Service Guide Section
To Next Page
Loading...
Need help?
General
