Keysight Technologies N9030B User Manual

N9030B PXA Signal Analyzer Service Guide 87
Instrument Messages
Introduction
Viewing Entries
Press:
System, Show
Errors
, Status
Press: System, Show
Errors
, History
Send SCPI query to the desired
interface.
SYSTem:ERRor?
Clearing the Queue
Press:
System, Show
Errors
,
Clear Error Queue
Clears the errors in all the
queues.
Press:
System, Show
Errors
,
Clear Error Queue
Clears the errors in all the
queues.
Send *CLS command to the
desired interface.
Clears errors in the queue for this
particular interface only.
Table 3-1 Characteristics of the Event Queues
Characteristic Front-Panel Status Front-Panel History Remote Interfaces (GPIB/LAN)
Table 3-2 Summary of Event Reporting Modes
Event Type SCPI Error
Queues
Front Panel
History Queue
Status Panel Display
Error Event Logged Logged Displayed in Message Line
Warning Event Logged Logged Displayed in Message Line
Advisory Event Logged Logged Displayed in Message Line
Error Condition Detected Logged Logged Displayed in Status Line
Error Condition Cleared Logged
Warning Condition Detected Logged Logged Displayed in Status Line
Warning Condition Cleared Logged
Grayout Advisory (Benign) Not logged Logged Displayed in Message Line
Grayout Advisory (Forced)
See note
a
Logged Displayed in Message Line
a. Not logged, unless the cause of the Advisory was remotely generated, in which case a Warning mes-
sage, type –221, is logged.

Keysight Technologies N9030B Specifications

General

Brand	Keysight Technologies
Model	N9030B
Category	Measuring Instruments
Language	English