Keysight B2980B Series - Page 152

152 Keysight B2980B User’s Guide, Edition 1
Front Panel Reference
Display and Assist/Function Keys
Measure Volts (B2985B/B2987B) Sets up the voltage measurement range.
In the left field, select the range mode AUTO or FIXED.
In the right field, set the minimum and maximum range values
for the AUTO mode operation, or the range value for the FIXED
mode.
Measure Ohms (B2985B/B2987B) Sets up the resistance measurement range.
In the left field, select the range mode AUTO or FIXED.
In the right field, set the minimum and maximum range values
for the AUTO mode operation, or the range value for the FIXED
mode.
Spot Source Range (B2985B/B2987B) Sets the voltage output range to 20 V,
1000 V, or 1000 V.
Triggered Voltage
Source (B2985B/B2987B) Specifies a constant voltage output value by
a trigger input. The voltage source changes the output to the
specified value by receiving a trigger signal. This is available in
the status VS Function OFF and Voltage Source On.