13-39
Using Various Functions > About Functions
Sending/Storing
This cannot be set when Text Stamp is set in the system settings.
Sending Jobs (page 15-61)
Storing Jobs (page 15-63)
Item Value Description
Off
On Stamp Any text string (32 characters
or less), Template 1 to 8
Select the text entry box and enter the text
string you want to print, or select the text
stamp you want to print from the displayed
templates.
After selecting the stamp, select [Next].
Templates that have been set will appear.
Text (Text Stamp) (page 15-35)
Position Position Top Left, Top Middle, Top
Right, Middle Left, Center,
Middle Right, Bottom Left,
Bottom Middle, Bottom Right
Set the stamp position to be printed.
Select [Position] and select the text stamp
position.
You can set stamp position details and the
angle of the stamp.
Nudge Top/Bottom: -10 to +10 mm
Left/Right: -10 to +10 mm
Fine adjust the position of the stamp.
Rotation 0 to 359 degrees Set how many degrees you want to rotate the
stamp from the left or right.
To Next Page
Loading...
