Kyocera Taskalfa Pro 15000c - Page 350

13-42
Using Various Functions > About Functions
Sending/Storing
On Font Font Courier, Letter Gothic Set the font of bates stamp.
Size Registered font sizes are
displayed.
Set the font size of bates stamp. For details
on registering font sizes, refer to the following:
Font Size (Bates Stamp) (page 15-35)
Color Cyan, Magenta, Yellow, Red,
Green, Blue, Black
Set the color of the bates stamp.
Style None, Bold, Italic, Bold/Italic Set the font style of bates stamp. Select a font
style by checking the checkbox.
Display
Pattern
Clipping, Overwrite Set the display method of the bates stamp.
Density 10 to 100%
(in 10% increments)
Set the density of bates stamp color.
Set the value by selecting [+] or [-].
Original Orientation Top Edge on Top,
Top Edge on Left, Auto
Select the orientation of the original document
top edge to scan correct direction. Select
[Original Orientation] to choose orientation
of the originals, either [Top Edge on Top] or
[Top Edge on Left]. Then select [OK].
NOTE
This cannot be set when Bates Stamp is set in the system settings.
Sending Jobs (page 15-61)
Storing Jobs (page 15-63)
Item Value Description
Off
On Stamp Date, User Name, Serial
Number, Numbering, Text 1,
Text 2
Set the stamp to be printed.
To set any text string, select the entry box of
[Text 1] or [Text 2], enter the text string you
want to print, and select [Text 1] or [Text 2].
After selecting the stamp, select [Next].
Date Format MM/DD/YYYY, DD/MM/YYYY,
YYYY/MM/DD
Set the format of the date.
This appears if you selected [Date] in
"Stamp".
Item Value Description