19-19
Troubleshooting > Troubleshooting When Feeding Paper
Paper does not feed. Is the paper loaded correctly? Load the paper correctly. Step 1 Check the
operation
environment.
Have you checked the paper
condition and settings?
Check the paper condition and
settings.
Step 2 Check the
condition and
settings of paper.
Does the System Menu setting
match the printer driver setting?
Check the System Menu and
printer driver settings, and
change as needed.
―
Is [Main Unit Paper Feed
Speed] set to [Low]?
Set [Main Unit Paper Feed
Speed] to [Normal].
[Main Unit Paper Feed Speed]
is displayed when feeding paper
from cassette 1 to 4.
page 15-14
page 15-18
Is [Paper Feeder Action] set to
[Standard]?
Set [Paper Feeder Action] to
[Facilitate Feed] or [Facilitate
Feed (Maximum)] in the System
Menu.
[Paper Feeder Action] is
displayed when optional paper
feeder (cassette 5 to 8) is
attached to the machine and
feeds paper.
page 15-14
page 15-18
Printouts are wrinkled. Is the paper loaded correctly? Load the paper correctly. Step 1 Check the
operation
environment.
Have you checked the paper
condition and settings?
Check the paper condition and
settings.
Step 2 Check the
condition and
settings of paper.
― Remove the paper from the
cassette, and turn the loading
orientation of the paper 180
degrees around. Turn the stack
of paper over and reload.
―
― Adjust the Paper Loop Amount
Adjustment setting in the
manual settings.
page 5-12
page 6-9
Symptom Checkpoints Corrective Actions Reference Page
To Next Page
Loading...
