19-50
Troubleshooting > Other Trouble
R
Printing System error. — An error has occurred on
Printing System.
Refer to Responding to Printing
System Error for the error code
and corrective actions.
page 19-40
Printing System error.
Press Status/Job
Cancel key to check
error.
Select [Status/Job Cancel] key.
Is the [Printing System Error.]
message displayed?
An error has occurred on
Printing System.
Refer to Responding to Printing
System Error for the error code
and corrective actions.
page 19-40
Select [Status/Job Cancel] key.
Is the [Device/Communication]
screen displayed?
An error has occurred on
Printing System.
Select [Printing Sys Err] of the
[Device/Communication]
screen and check error.
page 19-40
Message Checkpoints Corrective Actions
Reference
Page
Regulating the
temperature...
― The machine is under the
adjustment to maintain its
quality. Please wait.
―
Removable memory
error.
*1
Is writing to a removable
memory prohibited?
An error occurred in the
removable memory. The job
stopped. Select [End].
The error cord is as follows.
01: Connect a removable
memory that can be written to.
―
― An error occurred in the
removable memory. The job
stopped. Select [End].
The error cord is as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, the removable
memory is not compatible with
the machine. Use the removable
memory formatted by this
machine. If the removable
memory cannot be formatted, it
is damaged. Connect a
compatible removable memory.
―
Removable Memory is
full.
*1
― The job is canceled. Select
[End].
Insufficient free space in the
removable memory. Delete
unneeded files.
―
Message Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
