Robot control box
Chapter 3 - page 8
M-HE.002.1003
The adjusted time indicates how long water containing Astri
®
-L brush
cleaning agent
1
should be blown across the cleaning brushes, after pre-
treatment of a cow.
The number of times required for blowing empty the Astri
®
-L brush cleaning
agent
1
system, should be indicated in this screen (descale system setting is
"yes").
Decalcifying (descale) the cleaning system (yes or no), can be adjusted via
this screen. When using Astri
®
-L brush cleaning agent, decalcifying in not
necessary.
After reaching the 5 kg (11 lb.) level, the milk pump continues to turn for a
while. The time allowed for turning can be adjusted in this screen. If a value
of 11 s is entered, no alarm will be generated in case the 5 kg (11 lb.) level
is not reached after two minutes.
Milk in the delivery line to the tank can be pumped away with the help of
water. This screen indicates how long the pump needs to replace water to
pump the milk into the tank. As soon as the time has lapsed, milk and water
are discharged in the sewer.
In this screen it can be adjusted whether there is synchronisation of this robot
with other robots. Alarms are generated through the CRS.
In this screen you can adjust the time period in which the robot should remain
out of operation after a main cleaning. Only applicable in case of a low
occupation of the robot.
1) Before use carefully read the manufacturers instructions.
Time for blowing out
(Astri-L)
3 sec
Empty Astri-L tank
pulses
10
Descale system yes
(Astri-cid)
no
Additional operation
milk pump: 5
Entry of 11 sec
no alarm on pump
0 sec pumping
for water-draining
of milk
Cleaning yes
with CRS
no
Waiting time after
main cleaning
0 min
To Next Page
Loading...
Need help?
General
