Chapter 3 - page 31
Operator’s manual ASTRONAUT
M-HE.002.1003
By selecting "on", the sponge for cleaning of the laser screen is pressed
against the laser.
In this screen the sponge for the cleaning of the laser screen can be
moistened by spraying water on the sponge.
In this screen a valve can be operated which ensures that air can be blown
on the laser glass. In this way, the glass is blown dry.
This option is not in use at the moment.
By selecting "on" in this screen, a cleaning of the laser glass is initiated.
By means of this option, the teat cups can be cleaned after each cow.
Testmenu > Version
This screen contains information for the service technician. On this screen
software versions are described.
Service technician information.
After this screen several other screens are displayed with settings in the
special adjustment menu. These settings can only be changed by the service
technician.
on
Laser sponge cyl.
off
on
Laser sponge water
off
on
Air dry laser
off
NFP[8] on
Valve 8
off
on
Wash laser lens
off
on
Lely Wash
off
Astr:CXA31006 ZBM30
Pos:6 Lia: I5
VCPC L CAN: 17
MQC 8 MQC 007B
CAN: 30423
NFP: 20130
To Next Page
Loading...
Need help?
General
