LELY ASTRONAUT User Manual

Chapter 3 - page 33
Operator’s manual ASTRONAUT
M-HE.002.1003
Display of the actual height. Both the required and the actual values are
displayed. The required position can be established with the arrows on the
right-hand side.
The "Updown" function allows the speed of the ram for upward and
downward movement to be tested.
If "yes" is adjusted, than the speed increases at a larger displacement.
Positioning of left rear teat cup. By means of the right-hand arrows the
required position of the other teat cups can be established as well.
The "Required X-position" indicated here belongs to the teat cup which was
just positioned in the previous screen.
Turn in the arm cleaning rolls.
This screen contains information for the service technician.
The "Required Y-position" indicated here belongs to the teat cup which was
just positioned in the previous screen.
Current height
ADC=0 400 mm
Required height
ADC=0 400 mm
Updown
400 mm 400 mm
yes
X fast?
no
Laser
Attach: 5 5
Required X position
ADC=0 0 mm
Angle 0 1/2degr
ADC=0 Xact= 0 mm
yes
Turn in arm
cleaning rolls
no
LR
ADC=0 100 mm
Xact 0 mm
Required Y position
0 0
0 0
Yact= 0 mm

LELY ASTRONAUT Specifications

General

Type	Automatic Milking System
Manufacturer	Lely
Model	Astronaut
Milk Yield Recording	Yes
Cleaning System	Automatic
Energy Consumption	Varies depending on model and usage
Weight	Varies depending on model
Dimensions	Varies depending on model
Software	LELY T4C
User Interface	Touchscreen
Connectivity	Ethernet
Milking Capacity	60-70 cows