Figure 333. Cable routing for 6 SAS/SATA drives and 2 AnyBay drives and 2 NVMe front drive bays with an 8i or 16i SFF
RAID adapter (Gen 3)
Table 140. Mapping between one front AnyBay backplane and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
2 NVMe 2–3, 0–1
2 PCIe 1, 2
Cable routing with a CFF RAID adapter
The following tables show the mapping relationship between backplane connectors and an 8i or 16i CFF
RAID adapter (Gen 3 or Gen 4).
Chapter 6. Internal cable routing 395
To Next Page
Loading...
