Figure 334. Cable routing for 6 SAS/SATA drives and 2 AnyBay drives and 2 NVMe front drive bays with an 8i or 16i CFF
RAID adapter (Gen 3 or Gen 4)
Table 141. Mapping between one front SAS/SATA backplane and a CFF RAID adapter
Backplane/adapter
From To
Front BP (SAS)
1 SAS 0 1 C0
2 SAS 1 2 C1
Front BP (NVMe)
3 NVMe 2–3, 0–1
3 PCIe 1, 2
CFF RAID adapter
4 MB input
4 PCIe 3
10 x 2.5'' SAS/SATA
See this section to understand the cable routing of 10 front SAS/SATA drives with the 6 x 2.5'' SAS/SATA + 4
x 2.5'' AnyBay backplane installed.
396
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
