Figure 357. Cable routing for six SAS/SATA drives and two AnyBay drives and two NVMe front drive bays with a 16i SFF
RAID adapter (Gen 3)
Table 164. Mapping between one front AnyBay backplane and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0–3, 4–7 1 C0, C1
Front BP (power)
2 Power and sideband
2 Power port for front BP
Front BP (NVMe)
3 NVMe 6–7
3 PCIe 2
4 NVMe 8–9
4 PCIe 1
Cable routing with a CFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and a 16i CFF HBA/
RAID adapter (Gen 3 or Gen 4).
422
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
