Lenze i410 - Page 297

25232 0x6290 Warning invert
rotaon Keypad display: Invert rotaon
Cause Remedy Error type/response
•
Negave setpoint selecon with an acve
limitaon of rotaon 0x283A
(P304.00).
•
The "Reverse rotaonal direcon"
0x2631:013 (P400.13) funcon was
requested with an acve limitaon of
rotaon 0x283A (P304.00).
•
Check se
tpoint selecon and trigger.
•
Check
seng in 0x283A (P304.00).
Warning
•
The motor is brought to a standsll, since a
reversal of the rotang direcon is not
permissible.
Related topics
4Con
trol/restrict direcon of rotaon of the motor ^
59
25233 0x6291 Maximuml allowed troubles exceeded Keypad display: Trouble overow
Cause Remedy Error type/response
The number of permied restart aempts
aer
a fault set in 0x2839:003 (P760.03) was
exceeded. The fault occurred to frequently and
could not be reset.
Check and the eliminate the fault. Fault
•
The motor remains at a standsll, no
automac restart is executed.
Related topics
4
Automac restart aer a fault ^ 226
25248 0x62A0 User-dened fault (LECOM) Keypad display: UserFault(LECOM)
Cause Remedy Error type/response
Error message is not available for the inverter
i410.
The
"Acvate fault" funcon was triggered via
bit 10 of the LECOM control word .
Eliminate error cause and then reset error. Fault
25249 0x62A1 Network: user fault 1 Keypad display: Ne
tw.UserFault 1
Cause Remedy Error type/response
Error message is not available for the inverter
i410.
The
"Acvate fault 1" funcon was triggered via
the NetWordIN1 data word .
Eliminate error cause and then reset error. Fault
25250 0x62A2 Network: user fault 2 Keypad display: Ne
tw.UserFault 2
Cause Remedy Error type/response
Error message is not available for the inverter
i410.
The
"Acvate fault 2" funcon was triggered via
the NetWordIN1 data word .
Eliminate error cause and then reset error. Fault
25265 0x62B1 NetWordIN1 conguraon incorrect Keypad display: Ne
tWordIN1 error
Cause Remedy Error type/response
Error message is not available for the inverter
i410.
T
wo bits of the NetWordIN1 data word were
assigned to the same funcon.
Check and correct conguraon of the
NetWordIN1 data word.
•
The funcons that are to be triggered via
bits 0 ... 15 of the NetWordIN1 data word are
dened in ... .
Trouble
Diagnoscs and fault eliminaon
Error codes, causes and remedies
297