Reports
Menu Settings Page
This prints the Menu settings page which contains the Configuration menu settings and their current values.
Event Log
Additional diagnostic information is available when the event log is printed. The first page of the report shows the
general device information.
The specific events that appear in the report vary depending on the operational history of the printer. Logs may be
printed from the following events:
• Job accounting log failures
• NV reset failures
• NV mirror entries
• 9xx and 1xx (print engine) service error entries
• Programming error entries
• Maintenance count reset entries
• Clear log entries
• Paper jam entries
• Firmware update entries
• JFFS2 partition format entries
• USB setup pkt info entries
• Supply event entries
To print the Event log:
From the Configuration menu, navigate to Reports > Event Log.
Panel Menus
This enables or disables the control panel menus.
Available options:
• On—Menus enabled
• Off—Menus disabled
Demo Mode
Demo mode is often used in retail environments to highlight printer capabilities. The printer stores demonstration files
in the resident demo file of the base RIP firmware and in any supported optional memory devices.
When this mode is activated, the printer ignores all print jobs sent to it other than the demo file selected by the user.
Each demo file consists of one or more printed pages.
4514-420, -430
Service menus
122
To Next Page
Loading...
Need help?
General
