Available options:
• Activate—The printer boots into Demo mode after each power cycle.
• Deactivate—The printer boots into normal mode.
To print a demo file:
1 Activate Demo mode, and then POR the printer.
2 Select a demo file from the displayed list, and then press OK to print.
Factory Defaults
This restores the printer's settings to the network settings (on network models only) or to the base printer settings.
Restore Base
Warning—Potential Damage: This operation cannot be undone.
This restores all non-critical base device NVRAM settings to their factory default settings.
Restore STD NET
Warning—Potential Damage: This operation cannot be undone.
This restores all network NVRAM settings. The printer immediately performs a POR and restores the appropriate settings
to their factory default values. This option is available only on models with an integrated network adapter.
Energy Conserve
This affects the values that appear in the Power saver setting in General settings menu.
Available options:
• Off—The Power saver menu displays a Disabled setting. When selected, it disables the Power saver feature.
• On—Disabled does not appear in the Power saver menu. The user cannot disable the Power saver feature.
Wipe All Settings
This makes any sensitive information that may exist on the volatile or non-volatile storage of the device completely
indecipherable. When selected, the printer performs a non‑critical NVRAM reset and then reboots.
Font Density
This creates microscopic holes in all black text. The holes save toner by reducing overlapping toner.
Available options: 1 to 5
Font Sharpening
This allows a user to set a text point-size value below which the high‑frequency screens will be used when printing font
data.
4514-420, -430
Service menus
123
To Next Page
Loading...
Need help?
General
