Available options:
• Off
• On
Reduced Curl
When on, this setting significantly reduces throughput and should be activated only as a last resort to solve paper curl
problems. The printer uses this mode only when the media type is set to Paper.
Available options:
• Off
• On
A5 Loading
This determines the orientation used when printing on A5 paper.
Available options:
• Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
• Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.
USB Speed
This setting is used to set the throughput of the USB port on the printer.
Available options:
• Auto
• Full—Forces the USB port to run at full speed and also disables its high‑speed capabilities.
USB PnP
In some cases, the USB port at the back of the printer may be incompatible with the chipset in a user’s PC. This setting
lets the user change the USB driver mode to improve its compatibility with these PCs.
Available options:
• 1
• 2
Exit Config Menu
Select this to exit the Configuration menu. The printer performs a POR and restarts into normal mode.
4514-420, -430
Service menus
124
To Next Page
Loading...
