Lexmark MS410 series Service Manual

Action Yes No
Step 4
From under the printer, check the duplex, belt, and roller for wear and
damage.
Are they free of wear and damage?
Go to step 5. Replace the duplex.
See “Duplex removal”
on page 193.
Step 5
a Remove the input tray.
b POR into the Diagnostics menu and perform a duplex sensor test:
Diagnostics Menu > Duplex Tests > Sensor Test
c Lower the duplex jam door, and toggle the duplex sensor.
Does the sensor state on the control panel display change when it is
toggled?
Go to step 6. Replace the duplex
sensor. See “Duplex
sensor and input
sensor removal” on
page 194.
Step 6
Does the error remain?
Contact the next level
of support.
The problem is solved.
240 paper jams
Jam, tray [x] [24y.xx]
1 Pull out the tray completely.
2 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4514-420, -430
Diagnostic information
63

Lexmark MS410 series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 40 ppm
Duplex Printing	Standard
Processor Speed	800 MHz
Warranty	1-year limited warranty
Print Resolution	1200 x 1200 dpi
Connectivity	USB, Ethernet
Input Capacity	250-Sheet Input
Output Capacity	150 sheets
Mobile Printing	Lexmark Mobile Print
Operating System Compatibility	Windows, macOS, Linux
Dimensions	15.7 x 15.0 x 10.3 inches
Weight	31.0 lbs
Recommended Monthly Page Volume	750 - 3, 500 pages