Insufficient memory service check
Action Yes No
Step 1
Check the memory card for proper installation.
Is it properly installed?
Go to step 2. Reseat the memory
card.
Step 2
a Print the Menu settings page:
Settings > Reports > Menu Settings Page
b POR into the Configuration menu and reset the printer’s settings to
factory default:
Configuration Menu > Factory Defaults > Restore Base
c Remove the memory card.
d Restart the printer.
Does the error remain?
Replace the controller
board. See “Controller
board removal” on
page 164.
Replace the memory
card.
4514-420, -430
Diagnostic information
79
To Next Page
Loading...
