22.01.2014
2 3 113 060 en Additional page GMK6400
Prerequisites The safety harness only ensures secure protection from falling if a suitable
fall prevention safety system (personal protective equipment) is worn. This
fall prevention safety system must be attached to the safety harness on the
truck crane.
Requirements The fall prevention safety system must correspond to the requirements of
the applicable standards and regulations in the country in which you are
working. If you are unsure, find out which standards and regulations apply
for the country in which you are working.
The fall prevention safety system must consist of:
– a combined shoulder, waist and seat belt,
– a catch belt with two lines for fastening at feet height.
H
Only one person at a time is allowed to be secured by the safety harness.
The weight of the person to be secured must not exceed 140 kg (309 lbs).
If you are unsure about which type of fall prevention safety system is
required, please contact
Manitowoc Crane Care.