Crane operation
11.7 Heating and air-conditioning system
11 - 132 3 112 993 en Operating manual GMK 6400
12.07.2013
11.7.2 Air-conditioning system
You can use the air-conditioning system to cool and dry the air in the crane
cab.
Warnings Do not cool the air in the crane cab too much.
The difference between the outside temperature and the inside temperature
should be at the most 10°C to 14°C (50°F to 57.2°F).
If the cooling is too severe, you may frequently feel physically uncomforta-
ble, usually only after you leave the cool room.
Avoid having cold air blowing directly onto your body.
When using recirculated air, you should switch over to fresh air mode to
ensure a fresh supply of oxygen at the same time. Adjust the cooling output
to your actual needs:
If the truck crane has been exposed to strong sunlight for a long period of
time, for example, the air conditioning system should initially be operated
at the highest blower level with the engine running.
The door or at least the windows should be left open for a short while to air
thoroughly. The cooling-down procedure can be accelerated by increasing
the engine speed.
If the air-conditioning system is operated continuously, close the windows
and doors to ensure sufficient cooling.
Set the fan to a lower level once the inside temperature has reached the
desired temperature.
Switching on/off
• Start the engine. The air-conditioning system operates only when the
engine is running
• Switch off the auxiliary heaters
– Auxiliary water heater;
à p. 11 - 140
– Auxiliary air heater;
à p. 11 - 141
– Switching on:
• Press switch (1) down
– Switching off:
• Press switch (1) up