Malfunctions during crane operation
14.6 Hydraulic emergency operation
Operating manual GMK 6400 3 112 993 en 14 - 67
12.07.2013
14.6.6 After emergency operation
You must restore the truck crane to its original state after finishing emer-
gency operation.
Switching off
emergency
operation
• Switch off emergency operation; à p. 14 - 62.
• Switch off the engine.
Switching over to
crane operation
After every emergency operation
• Switch valves 1 to 7 to crane operation; à p. 14 - 63.
Disconnecting the
hoses
• Disconnect the hoses; à p. 14 - 61.
• Close all the connections and hoses with the caps.
• Remove the transformer.
To Next Page
Loading...
