Crane operation
11.6 Work break
11 - 128 3 112 993 en Operating manual GMK 6400
12.07.2013
11.6 Work break
11.6.1 In case of short work breaks
•
Switch off the slewing gear
– The lamp in the (1) button must be dimly lit
– Lamp (2) must light up – slewing gear brake engaged
Switch the engine off, turn the ignition key to position 0 and remove it.
Ensure that no unauthorised persons can operate the truck crane;
à To
secure the truck crane
, p. 11 - 129
G
Risk of accident by suspended loads
Never turn off the engine with a load suspended. You must have the control
levers at hand in order to intervene at any time.
Always set down the load before you leave the crane cab.
To Next Page
Loading...
