Driving modes and rigging for on-road driving
6.1 Driving modes
6 - 2 3 112 993 en Operating manual GMK 6400
12.07.2013
6.1.1 Information on how to use the tables
The tables consist of two parts:
– The driving mode of your truck crane is specified in the top part, next to
Equipment. Find out which driving mode applies to your truck crane. Each
truck crane has one driving mode only
– The required rigging mode for this driving mode and the accessories you
are allowed to transport are specified in the middle section, next to
Rigging mode
Example of how to use the table:
Assuming your truck crane is equipped with 445/95 tyres, aluminium rims and
transmission retarder.
In this case the driving mode in the upper part, next to equipment, is 2.
According to the specifications in the lower part, next to rigging mode:
– counterweight, lattice extension, auxiliary hoist, Mega Wing Lift and spare
wheel must be removed.
– all hook blocks must be transported on a separate vehicle.
To Next Page
Loading...
Need help?
General
