Driving modes and rigging for on-road driving
6.5 Installing/removing the supporting box
Operating manual GMK 6400 3 112 993 en 6 - 63
12.07.2013
6.5.5 Establishing/disconnecting the electrical connection
Disconnecting
• Pull connecting cable (2) and (7) from sock-
ets (3) and (5).
Insert them into the dummy sockets (1)
and (8).
• Remove the plug (6) from the socket (5) and
plug it into the socket (4).
• Seal sockets (3) and (5) with the protective
caps.
Establishing
• Remove the plug (6) from the socket (4) and
plug it into the socket (5).
• Pull connecting cable (2) and (7) from
dummy sockets (1) and (8)
Insert them into the sockets (3) and (4).
• Seal dummy sockets (1) and (8) with the pro-
tective caps.
S
Risk of malfunctions in the carrier electronics
Always turn off the ignition before you establish or break the electrical con-
nection. This prevents malfunctions and error messages in the carrier elec-
tronics.
To Next Page
Loading...
