Driving with rigged truck crane
13.3 Before driving
Operating manual GMK 6400 3 112 993 en 13 - 5
12.07.2013
13.3.2 Checking tyre pressure and wind speed
•
Ensure that all the tyres are at the prescribed pressure levels; Ã Tyres,
p. 1 - 14.
The same maximum permissible wind speeds for working with the crane
apply to driving the truck crane.
• Check the wind speed; à p. 11 - 54.
S
Risk of damage to the tyres
You may only drive the truck crane if the tyres are at the prescribed pres-
sure level.
Never reduce the tyre pressure in order to increase the tyres' bearing sur-
face.
G
Risk of accident from excessively high wind speeds
You may not drive the rigged truck crane if the wind speed exceeds the
maximum permissible values specified in the
Lifting capacity table. In this
case, you must bring the truck crane into a secure state.
To Next Page
Loading...
Need help?
General
