Basic safety instructions
2.2 Organisational measures
Operating manual GMK 6400 3 112 993 en 2 - 3
12.07.2013
2.2 Organisational measures
The operating instructions and the lifting capacity table should be kept in
the truck crane for immediate access at all times, and must not be removed
from the truck crane. You must have read and understood the operation and
safety instructions in these operating instructions and comply with them
when working.
In addition to the operating instructions and the lifting capacity table,
observe all general, statutory and otherwise applicable regulations concern-
ing accident prevention and environmental protection. You must have read
and understood these and observe them when operating the crane and driv-
ing.
They could include:
– How to deal with hazardous materials
– The wearing of personal protective equipment
– Road traffic regulations and
– All applicable requirements concerning the operation of a crane.
Make sure that persons who will work on the truck crane are provided with
the required information prior to starting operations. Instruct your person-
nel (e.g. banksmen, slingers, rigging personnel) accordingly.
Make sure the maintenance personnel have the necessary expertise for safe
crane operation. Make sure the maintenance personnel have access to the
operating manual.
Only qualified or trained personnel may carry out work on the truck crane.
Responsibilities regarding the operation of the crane, rigging, maintenance
and repair work must be clearly defined.
Make sure only authorised personnel carry out work on the truck crane.
Do not leave long hair untied or wear loose clothing or jewellery (including
rings) during work. These could get caught or pulled into the unit and result
in injury.
Use your personal protective gear whenever necessary or prescribed.
Observe all safety instructions and warnings on the truck crane.
Keep all safety instructions and warnings on the truck crane in a legible con-
dition.
s