Malfunctions during crane operation
14.1 Emergency stop switch
Operating manual GMK 6400 3 112 993 en 14 - 1
12.07.2013
14 Malfunctions during crane operation
14.1 Emergency stop switch
• Stop all crane movements.
Four emergency stop switches are provided
for an emergency:
• Press an emergency stop switch (1), (2) or
(3). The switch engages.
The engine shuts down.
After activating an emergency stop switch;
à Resetting the emergency stop switch, p. 4 - 26.
H
The battery master switch cannot be used as an emergency stop switch for
the engine. The engine continues to run after the battery master switch has
been switched off.
G
Risk of overloading if used improperly
Only actuate the emergency stop switch if it is no longer possible to stop
the crane movements with the normal operating elements.
The emergency stop switch stops the crane movements suddenly. This
may overload the truck crane, e.g. in the event of high working speeds and
large working radii.
1 On the carrier
2 On the hand-held control
3 In the crane cab
To Next Page
Loading...
Need help?
General
