Driving modes and rigging for on-road driving
6.4 Installing/removing outrigger beams
6 - 44 3 112 993 en Operating manual GMK 6400
12.07.2013
6.4.6 Establishing/disconnecting the electrical connection
The electrical connection is only present on truck cranes with an outrigger
pressure indicator.
(A) – Separating the connection
• Pull the plugs (1) apart. Protect the plugs
against dirt and moisture.
(B) – Connecting
• Put the plugs (1) together.
• Protect the separating points against dirt
and moisture.
S
Risk of malfunctions in the electronic system
Always turn off the ignition before you disconnect or establish the electrical
connection. This prevents malfunctions and corresponding error messages
in the subsequent crane operation.
To Next Page
Loading...
