Driving modes and rigging for on-road driving
6.3 Removing/installing main boom
Operating manual GMK 6400 3 112 993 en 6 - 27
12.07.2013
6.3.6 Disconnecting/connecting hydraulics/electrical
Disconnecting The number of hoses/cables depends on how the truck crane is equipped.
– The main boom must be raised.
• Remove the hoses (3) from the ports.
• Remove the plugs (2) from the sockets.
• Insert the bridging plugs (1).
• Close all hoses, connections, plugs and
sockets.
• If necessary, secure all the hoses/cables so
that they do not swing loose when the main
boom is raised.
s
S
Risk of malfunction in the superstructure electronics!
Always turn off the ignition in the crane cab before you establish or
separate the electrical connection. This prevents malfunctions in the
electronics and corresponding error messages in the subsequent crane
operation.
To Next Page
Loading...
Need help?
General
