Driving
5.2 Operating the transmission
Operating manual GMK 6400 3 112 993 en 5 - 27
12.07.2013
5.2.4 Changing the operating mode
The display shows which operating mode is switched on.
– Symbol (1) –
Automatic operating mode on.
– Symbol (2) –
Manual operating mode on.
It is possible to switch between the operating modes when the vehicle is
stationary or when driving.
Change to auto-
matic mode
The
Automatic operating mode is intended for on-road driving.
• Press the switch lever to the left once.
The transmission switches to the
Automatic operating mode
– When at a standstill, a suitable starting gear is engaged,
– While driving, the gears are changed automatically, depending on the
load.
Change to manual
mode
The
Manual operating mode is intended for off-road driving with load con-
ditions changing on short notice.
You can change over either with a gear change or without a gear change.
Changing without gear change
• Press the switch lever to the left once.
The transmission remains in the currently selected gear and is now in
Manual operating mode.
Changing with gear change
• Press the switch lever forwards or backwards once.
The transmission upshifts one gear (or downshifts one gear) and is now in
Manual operating mode.
To Next Page
Loading...
Need help?
General
