Crane operation
11.2 Operation of the rated capacity limiter
Operating manual GMK 6400 3 112 993 en 11 - 51
12.07.2013
11.2.10 Entering the time/date
You can enter the time and date for the display (2).
• Press the (1) button once.
This opens the
Settings submenu.
• Press button (1) repeatedly until the desired
value flashes.
• Enter the new value with the buttons (7) and
(8) or with the switch (9).
• Enter all the required values.
• Press button (10) once – the newly entered
values will be accepted and displayed in the
main menu.
Illogical values (e.g. 77 seconds) will not be
accepted and the display will continue to flash.
You can cancel the input at any time. Press the button (1).
None of the values will be changed.
2 Hours
3 Minutes
4 Day
5 Month
6 Year