Starting/turning off the engine for driving
4.1 Starting the engine from the driver's cab
4 - 24 3 112 993 en Operating manual GMK 6400
12.07.2013
4.1.13 Setting the idling speed
After the engine is started, the idling speed is regulated automatically. If
necessary, you can adjust the idling speed manually using the multipurpose
switch.
H
You can only set the idling speed when the truck crane is stationary.
Increasing/reducing the idling speed
• Press the switch (2) up/down until the required engine speed (1) has been
reached.
or
• Press the switch (2) upwards/downwards once. The engine speed (1) is
increased/reduced by 20 rpm.
Switching off the idling speed change:
• Push the switch forwards once. The idling speed is set automatically.
or
• Accelerate over 20 km/h (12 mph).
To Next Page
Loading...
