Crane operation
11.2 Operation of the rated capacity limiter
Operating manual GMK 6400 3 112 993 en 11 - 31
12.07.2013
11.2.3 Checks before operating the crane
Opening the
submenu
Crane operation is only enabled when the Monitoring submenu is open.
After a standstill of less than 48 hours and after accepting a rigging mode,
the
Monitoring submenu will open automatically.
You can also open the submenu manually.
• If necessary, open the main menu ö and press (1) button once.
The
Monitoring submenu will open.
H
You can only quit the RCL monitoring submenu when all crane movements
have stopped – control lever in zero position.
s
To Next Page
Loading...
