Driving modes and rigging for on-road driving
6.5 Installing/removing the supporting box
6 - 62 3 112 993 en Operating manual GMK 6400
12.07.2013
6.5.4 Establishing/disconnecting the pneumatic connection
When additional equipment is in use, there is a pneumatic connection
between the carrier and the supporting box.
(A) – Making a connection
• Open the connection (1).
• Connect the hoses (2) to the connection (1).
(B) – Disconnecting the connection
• Open the connection (1) and remove the
hose (2).
• Suspend the hoses in the clamp (3).
To Next Page
Loading...
