– Programming Manual 10. Unit Set-up 43
Search for Home position in progress is indicated by the oscillation of the mass
symbols . Home position reached is shown as follows:
If the Home position is not reached within a pre-determined time, or other causes do
not allow reaching it, the corresponding alarm messages are displayed.
Beware!!
When Home cannot be reached the masses of the balancing head are in an
indefinite position and could cause dangerous unbalance of the wheel. For
this reason we recommend not to make the wheel rotate.
End search for Home position
Press the F4 key or to highlight and press .
Press to exit the page.
Home position
reached
To Next Page
Loading...