Page 21
Functional Principle, Technical Data
optoNCDT 2300
Model ILD2300- 2LL 10LL 20LL 50LL
Measuring range
1
mm
(inches)
2 / 2
(.08 / .08)
10 / 5
(.39 / .20)
20 / 10
(.79 / .39)
50 / 25
(1.97 / .99)
Start of measuring range
1
mm
(inches)
24 / 24
(.94 / .94)
30 / 35
(1.18 / 1.38)
40 / 50
(1.57 / 1.97)
45 / 70
(1.77 / 2.76)
Midrange
1
mm
(inches)
25 / 25
(.98 / .98)
35 / 37,5
(1.38 / 1.48)
50 / 55
(1.97 / 2.17)
70 / 82.5
(2.76 / 3.25)
End of measuring range
1
mm
(inches)
26 / 26
(1.02 / 1.02)
40 / 40
(1.57 / 1.57)
60 / 60
(2.36 / 2.36)
95 / 95
(3.74 / 3.74)
Measuring rate
7 adjustable stages: 49.14 kHz
2
/ 30 kHz / 20 kHz / 10 kHz / 5 kHz / 2. kHz / 1.5 kHz
Linearity
µm < ± 0.6 < ± 2 < ± 4 < ± 10
% FSO < ± 0.03 < ± 0.02
Resolution (at 20 kHz)
2
µm 0.03 0.15 0.3 0.8
Light spot diameter
(±10 %)
SMR, µm 85 x 240 120 x 405 185 x 485 350 x 320
MR, µm 24 x 280 35 x 585 55 x 700 70 x 960
EMR, µm 64 x 400 125 x 835 195 x 1200 300 x 1940
Light source Semiconductor laser < 1 mW, 670 nm (red); Class 2 acc. to IEC 60825-1: 2014
Permissible ambient light 10,000 lx … 40,000 lx
Power supply 24 VDC (11 ... 30 V); P < 3 W
Digital interface
RS422 (16 bit) / Ethernet / EtherCAT / PROFINET
4
/ EtherNet/IP
4
Analog output
4
4 … 20 mA / 0 … 5 V / 0 … 10 V / ± 5 V / ± 10 V
Temperature range Operation: 0 ... +50 °C (+32 °F up to +122 °F); storage: -20 ... +70 °C; (non-condensing)
Shock (IEC 60068-2-29) 15 g / 6 ms / 3 axes
Vibration (IEC 60068-2-6) 2 g / 20 ... 500 Hz
Protection class (DIN EN 60529) IP65
Housing size, material S, die-cast zinc
Weight approx. 550 g (incl. pigtail)
FSO = Full Scale Output, SMR = Start of measuring range, MMR = Mid of measuring range, EMR = End of measuring range; The specified data ap-
ply to white, diffuse reflecting surfaces (Micro-Epsilon reference ceramic for ILD sensors)
1) Second value is valid for a measuring rate of 49.14 kHz 3) Measuring rate of 20 kHz
2) Measuring rate of 49.14 kHz with reduced measuring range 4) Connection via interface module (see accessories)
To Next Page
Loading...
